Black Market Parts (BMP) E9x/E8x Fuel Pump Expansion Modules

The Black Market Parts BUCKETLESS LOW PRESSURE FUEL PUMP's are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450, Walbro 525, or Walbro 535 fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant. Pump(s) ship(s) assembled with OEM connector to plug into the factory fuel pump top hat making it quick and easy to install.

 

The modules below require customer to already own a stage 2 or 2.5 BMP Bucketless Pump

 

 

• Stage 3 (4.3 liters per minute)
  Our Stage 3 bucketed module will add a 450 pump to your existing PR Stage 2 or 2.5 kit. This will include all necessary hardware and wiring to upgrade your pump to a stage 3 and support up to 1000whp* (Rated for 875whp on 100% E85)

• Stage 3.5 (5.1 liters per minute)
  The Stage 3.5 pump module adds a Walbro 525 pump to your existing PR Stage 2 or 2.5 kit. This upgrade module will include all necessary hardware and wiring to upgrade your pump to a stage 3.5 or 3.75. Once combined with your existing kit, this pump combination can support up to 1,100whp* (Rated for 950whp on 100% E85).

 

While all bucketless fuel pump flows .2gpm more than a bucket design that retains the venturi it comes at a cost. Bucketless pumps should not be driven on tanks lower than ¼ full and should not be used for road course racing. This is not a disadvantage of only our bucketless system but is a disadvantage of all bucketless pump designs (or bucket designs which delete the venturi). If you do not plan on road course racing (not street racing) and are responsible at maintaining ¼ tank of fuel during spirited driving this is the pump for you.

Note: To reach the advertised ability of these fuel pumps use of the Precision Raceworks in tank filter regulator assembly is required.

This is a true plug and play solution that anyone can install in their home garage and start taking advantage of the benefits right away.

For more details see the specifications tab

Specifications

Factory BMW pump

• Pump flow 72psi (5bar): XXX GPM
• Pump Weight:
• Horsepower Supported Pump Gas:
• Horsepower Supported 100% E85: NOT COMPATIBLE

• Pump flow 72psi (5bar): XXX GPM
• Pump Weight:
• Horsepower Supported Pump Gas: 1,200+*
• Horsepower Supported 100% E85: 1,000+*
• Aftermarket EKP Required: Yes

*To reach the advertised ability of these fuel pumps use of the Precision Raceworks in tank filter regulator assembly is required.

Instructions

Download PDF Installation Instructions